What are the characteristics of the products needed for the long-term development of linear guide? We want our products to have a permanent use point in the transmission machinery, so our products must have very advanced functions! Among all the mechanical transmission devices, gear transmission is the most widely used, which is used to transmit motion and power between any two shafts. The characteristics of gear transmission are: stable gear transmission, accurate transmission ratio, reliable operation, high efficiency, long service life, high power, fast speed and large size range. For example, the range of transmission energy is from very small to tens of thousands of kilowatts; the maximum speed is up to 300 m / S; the diameter of gear varies from several millimeters to more than 20 meters. But gear manufacturing requires special equipment, meshing transmission will produce noise. Compared with gear drive, chain drive has the following main features: low manufacturing and installation accuracy; when the center distance is large, the drive structure is simple. Instantaneous chain speed and instantaneous drive screw nut mechanism is also called screw drive mechanism. It is mainly used to convert rotary motion into linear motion or linear motion into rotary motion. It mainly transmits energy (such as screw press, Jack, etc.); it also has transfer movement, mainly including feed screw of machine tool workbench, etc.); it can also adjust the relative position of each part of screw drive mechanism.

　　因此，為了更好地利用直線導軌，那么清潔直線導軌是必然的結構;導軌、直軸作為設備的核心部件之一，其功能是起導向和支撐作用。為了保證機床具有較高的加工精度，要求導軌和直線具有較高的導軌精度和良好的運動穩定性。在設備運行過程中，被加工工件的加工過程中會產生大量的腐蝕性粉塵和煙塵。基于這些煙霧和灰塵沉積表面的導軌和直線軸大量很長一段時間,它有一個偉大的對設備的加工精度的影響,并將表面形成腐蝕斑點的直線軸導軌,縮短設備的使用壽命。為了使機床工作正常穩定，保證產品的加工質量，要認真做好導軌、直軸的日常保養。注意:導軌清洗時請準備好干棉布和潤滑油。雕刻機的導軌分為直線導軌、滾柱導軌。清潔直線導軌:首先將激光頭移動到右側(或左側),找到直線導軌,用干棉布擦拭直到光潔,加一點潤滑油(可以使用縫紉機油,不使用石油),將激光頭左右慢慢推幾次,能均勻分布,這樣油! !

　　Therefore, in order to make better use of the linear guide rail, it is necessary to clean the linear guide rail; as one of the core components of the equipment, the guide rail and the straight shaft play a guiding and supporting role. In order to ensure the high machining accuracy of the machine tool, it is required that the guide rail and the straight line have high precision and good motion stability. In the process of equipment operation, a large number of corrosive dust and dust will be produced during the processing of the processed workpiece. Based on these smoke and dust deposition surface of the guide rail and linear axis for a long time, it has a great impact on the machining accuracy of the equipment, and will form corrosion spots on the surface of the linear axis guide rail, shorten the service life of the equipment. In order to ensure the normal and stable operation of the machine tool and the processing quality of the products, the daily maintenance of the guide rail and the straight shaft should be done well. Note: please prepare dry cotton cloth and lubricating oil when cleaning the guide rail. The guide rail of engraving machine is divided into linear guide rail and roller guide rail. Clean the linear guide: first move the laser head to the right (or left), find the linear guide, wipe it with dry cotton cloth until it is smooth, add a little lubricating oil (sewing oil can be used instead of oil), slowly push the laser head left and right several times, and it can be evenly distributed, so the oil!

　　以上是導軌絲杠制造商為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.2b4g.com

　　These are the related contents introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com