Ball screw is a compact part of machine tool. Therefore, when in use, we can ensure its normal use and service life only by paying close attention to many aspects. Here, we will learn about the precautions for the use of ball screw.

一、在使用之前，要對絲杠的潤滑狀態進行很好的檢查，因?yàn)槿绻麧L珠絲杠處于較差的潤滑狀態中，會在短時間內出現滾珠絲杠的使用的功能喪失的狀況。也可以說因?yàn)槟p情況的嚴重的出現，從而使其功能喪失。

1、 Before use, the lubrication state of the ball screw should be well checked, because if the ball screw is in a poor lubrication state, the function of the ball screw will be lost in a short time. It can also be said that its function is lost due to serious wear.

二、一旦給滾珠絲杠上涂好潤滑油之后，就要直接的進行使用，但是要注意的是在使用的過程中會有較多的灰塵吸附在上面，如果不及時的將這些灰塵清理干凈，就會造成其他的使用的問題，這時候，正確的操作方法就是使用干凈的麻木，然后在使用一些白煤油進行擦洗，之后，再在上面涂好潤滑油，進行下一次的使用。再涂潤滑油的時候，一定要注意不要出現混合使用潤滑油的狀況。

2、 Once the ball screw is coated with lubricating oil, it should be used directly. However, it should be noted that more dust will be adsorbed on it during use. If these dust are not cleaned in time, it will cause other use problems. At this time, the correct operation method is to use clean numbness, Then use some white coal oil for scrubbing, and then apply lubricating oil on it for the next use. When re applying lubricating oil, be sure not to mix lubricating oil.

三、在使用的過程中，不管出現什么樣的使用問題，非的人員，一定不要對絲杠進行拆卸處理，因?yàn)椴僮鞑划?dāng)?shù)脑挘唵蔚木褪腔覊m會進入到絲杠內，從而使?jié)L珠絲杠的使用精度受到影響。

3、 In the process of use, no matter what kind of use problems occur, non professional personnel must not disassemble the lead screw, because if the operation is improper, the simple thing is that dust will enter the lead screw, which will affect the use accuracy of the ball lead screw.

重新組裝的絲杠一旦出現組裝上的錯誤，那么這樣的絲杠就失去了使用的價值。而對于出了問題的滾珠絲杠，正確的做法就是請的認識進行維修處理

Once the reassembled lead screw has an assembly error, such lead screw will lose its use value. For the ball screw with problems, the correct way is to ask professional knowledge for maintenance