新聞中心
上銀直線導軌應該注意的事項!
來源:http://www.2b4g.com/ 日期:2019-03-19 發布人:
上銀直線導軌屬于精密直線導軌傳動組件,所以在使用的過程中需要有一個非常謹慎的態度,就算是采用了高性能的上銀直線導軌,一旦操作不當,不僅不能達到期望的性能效果,但也容易導致上銀直線導軌的損害。在這里為大家講解一些日常使用的上銀直線導軌應該注意的事項:
Shangyin linear guideway is a precise linear guideway transmission component, so a very cautious attitude is needed in the use process. Even if the high-performance Shangyin linear guideway is used, once the operation is improper, not only can not achieve the desired performance effect, but also easy to cause damage to Shangyin linear guideway. Here, I will explain some things that should be paid attention to in daily use.
為了防止腐蝕
To prevent corrosion
直接用手拿上銀直線導軌時,在使用前應將手上的汗水充分清洗并涂上優良礦物油,尤其在雨季和夏季,要非常注意防銹。
When directly holding the silver linear guide by hand, sweat should be thoroughly cleaned and coated with high quality mineral oil before use, especially in rainy season and summer, special attention should be paid to rust prevention.
保持環境清潔
Keep the environment clean
保持上銀直線導軌及其周圍環境整潔。即使是肉眼看不見的微小塵埃進入導軌,也會增加導軌的磨損,產生振動和噪聲。


Keep the silver linear guide and its surroundings clean and tidy. Even if the invisible dust enters the guideway, it will increase the wear and tear of the guideway, resulting in vibration and noise.
小心安裝
Careful installation
上銀直線導軌在使用中建議仔細安裝,不能用力沖壓,不能直接用錘子擊打?qū)к墸荒芡ㄟ^滾動體傳遞壓力。
The straight-line guide of upper silver must be carefully installed in use. It can't be punched hard. It can't hit the guide directly with a hammer. It can't transfer pressure through the rolling body.
正確安裝工具
Correct Installation Tools
上銀直線導軌需要使用合適、準確的安裝工具,盡量選用專用工具,可避免不選用布類和纖維類物品。
The silver linear guide needs to use appropriate and accurate installation tools, and select special tools as far as possible, so as to avoid not choosing cloth and fibre items.
相關新聞 /RELATED TO RECOMMEND
導軌絲杠選型必看!滾珠絲杠研磨級VS軋制級,選錯多花冤枉錢還影響精度
2026-05-04
導軌絲杠選型避坑!滾珠絲杠為何普遍不加減速機?附電機驅動選型案例
2026-05-03
滾珠絲桿裝配錯1步=精度報廢,導軌絲杠精密裝配全流程,零間隙實操指南
2026-04-27
導軌絲杠:精密傳動界的扛把子,聊聊滾珠絲桿的那些事
2026-04-24
導軌絲杠:滾珠絲杠副冷卻結構設計及溫升影響分析
2026-04-22
導軌絲杠選型避坑,梯形VS滾珠絲桿核心區別,90%從業者都選錯
2026-04-20
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法合理選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
相關產品 /RELATED TO RECOMMEND




